How To Change a Flat Tire in 8 Easy Steps (2024)

Are you prepared for the inconvenience of a flat tire? Knowing how to change a flat tire can save you time, money, and the frustration of being stranded on the side of the road. In this comprehensive guide, we will walk you through the process of changing a flat tire in 8 easy steps.

• Many vehicles come from the manufacturer with a spare tire and the tools you need for a tire change
• Changing a tire usually takes an average of 15 to 30 minutes
• You should follow the directions in your owner’s manual and stay away from traffic while changing your tire

From finding a safe location to removing the hubcap, using the car jack correctly, and attaching the spare tire, we cover all the essential topics to empower you with the necessary skills. Don’t let a flat tire derail your plans. Take control of your journey and stay protected on the road. Enter your zip code now to compare rates from the best insurance providers and ensure you have the coverage you need.

1. Find a Safe Place

If you get a flat tire, slow down and pull over as soon as you can. Look for a place away from the road, in a parking lot, driveway, or emergency lane if possible. Avoid braking or swerving suddenly, and activate your car’s hazard lights to give other drivers plenty of time to see your vehicle and avoid it. 

Make sure there’s enough space around the tire you need to change to stay away from traffic. People have died from vehicle collisions after trying to change a tire too close to a busy road. If you’re not sure that you can complete the task where you are, move your car; if you have roadside assistance coverage, now is the time to call them for help. Before you start working, set your car’s parking brake.

Compare The Best Insurance Quotes In The Country

Compare quotes from the top insurance companies and save!

Auto Home Health Life Business Motorcycle Pet Medicare Rental

 Secured with SHA-256 Encryption

2. Remove the Hubcap and Loosen the Lug Nuts

On many vehicles, the hubcap covers the lug nuts, meaning you have to remove it to access them. Some cars don’t have hubcaps, or you can remove the lug nuts before removing the hubcap. With most vehicles, you can use the flat end of a lug wrench (usually found in your vehicle’s trunk) to pry the hubcap off. Then, use the socket or lug wrench to loosen the lug nuts by turning them counterclockwise. Turn the wrench about one-quarter or one-half turn, but don’t remove the lug nuts completely yet.

3. Use the Car Jack

Place the car jack (also stored in your vehicle’s trunk) underneath the vehicle, next to the flat tire. You should see an exposed metal area on the vehicle’s frame where the jack should go. You can check your owner’s manual to make sure you chose the right place. It’s also a good idea to make sure the ground is firm and level. After the car jack is in position, turn it clockwise until it lifts the flat tire about 6 inches off the ground. Don’t place any part of your body underneath the car while the wheel is not on the ground.

4. Finish Unscrewing the Lug Nuts and Remove the Tire

At this point, you can finish unscrewing the lug nuts that you loosened earlier. Remove them and put them in a safe place to make sure you don’t lose any of them while you work. Then, grip the tire by its tread and pull it toward you to remove it from the car.

Compare The Best Insurance Quotes In The Country

Compare quotes from the top insurance companies and save!

Auto Home Health Life Business Motorcycle Pet Medicare Rental

 Secured with SHA-256 Encryption

5. Attach the Spare Tire and Tighten the Lug Nuts by Hand

You can usually find your spare tire in the trunk, underneath the vehicle, or on the back door, depending on your car. Put the spare tire on the car by lining up the lug bolts on the wheel with the holes on the hub in the center. Reattach the lug nuts and tighten them as much as you can by hand.

6. Lower the Car Jack and Finish Tightening the Lug Nuts

Once your spare is in place,  you can gently lower the vehicle until the tire is touching the ground. Then, use the lug wrench to tighten the lug nuts more.

7. Remove the Jack and Replace the Hubcap

Finish lowering the car jack, and tighten the lug nuts one more time. Be sure to use all your arm strength to get them fully tightened so the wheel doesn’t come off. If your vehicle’s hubcap fits the spare tire, you can replace it. If you plan to get a new tire soon or the hubcap doesn’t fit, store it in your vehicle’s cargo area.

Compare The Best Insurance Quotes In The Country

Compare quotes from the top insurance companies and save!

Auto Home Health Life Business Motorcycle Pet Medicare Rental

 Secured with SHA-256 Encryption

8. Put Away Your Equipment and Check the Spare’s Tire Pressure

Store your equipment, including the flat tire, and take a look around the vehicle to make sure you didn’t miss anything. Check the spare’s tire pressure and add air if needed. If you don’t have an air compressor, you can usually find one at a gas station.

How much does it cost to replace a flat tire?

Changing a tire is easy, even for people trying it for the first time. You can do it with just a wrench, a spare tire, a tire pressure gauge, and a car jack. Furthermore, knowing how to change a flat tire can save you a pretty penny. The Balance reports that a tire alone can cost $20 for a used tire or upwards of $100 for a new tire, not counting labor costs.

If you have collision or comprehensive car insurance, your company may cover slashed tires or other damage, as well as roadside assistance. However, most providers won’t pay for flats from normal wear and tear. 

Case Studies: Experiences in Changing a Flat Tire

Case Study 1: Jennifer’s Highway Heroics

Jennifer, a seasoned driver, encountered a flat tire while on a long-distance trip on the highway. Using the eight easy steps, she was able to change the tire swiftly and get back on the road in no time. Despite facing time constraints and heavy traffic, Jennifer remained calm, ensuring her safety and that of other motorists around her.

Case Study 2: Mike’s Midnight Mishap

Late one night, Mike experienced a flat tire in a poorly lit area with minimal tools. Utilizing his knowledge of the eight easy steps, Mike successfully changed the tire, relying on his flashlight and improvising with available resources. His resourcefulness and determination allowed him to navigate a challenging situation and continue his journey.

Case Study 3: Sarah’s Solo Success

Sarah, a newly licensed driver, faced a flat tire on a desolate road with no immediate assistance available. Applying the eight easy steps she learned, she was able to replace the tire efficiently, gaining confidence in her ability to handle unexpected situations independently. Sarah’s experience emphasizes the importance of learning essential skills to ensure self-reliance on the road.

Case Study 4: David’s Rainy Roadside Rescue

David found himself with a flat tire during heavy rainfall. Despite the unfavorable weather conditions, he remained composed and followed the eight easy steps meticulously. Armed with a raincoat and an umbrella, David successfully replaced the tire while keeping himself dry and safe. His experience highlights the significance of preparedness and adaptability in adverse weather situations.

Case Study 5: Emily’s Family Adventure

During a family road trip, Emily encountered a flat tire in a remote area with limited cellphone reception. Thanks to her familiarity with the eight easy steps, she efficiently changed the tire, keeping her family’s safety a top priority. Emily’s experience underscores the importance of teaching basic automotive skills to all family members, ensuring they can handle unexpected incidents together.

Compare The Best Insurance Quotes In The Country

Compare quotes from the top insurance companies and save!

Auto Home Health Life Business Motorcycle Pet Medicare Rental

 Secured with SHA-256 Encryption